Linux indent命令

Linux indent命令
Linux 命令大全

Linux indent命令用于调整C原始代码文件的格式。

indent可辨识C的原始代码文件,并加以格式化,以方便程序设计师阅读。
语法

indent [参数][源文件] 或 indent [参数][源文件][-o 目标文件]

参数

  • -bad或–blank-lines-after-declarations  在声明区段或加上空白行。
  • -bap或–blank-lines-after-procedures  在程序或加上空白行。
  • -bbb或–blank-lines-after-block-comments  在注释区段后加上空白行。
  • -bc或–blank-lines-after-commas  在声明区段中,若出现逗号即换行。
  • -bl或–braces-after-if-line  if(或是else,for等等)与后面执行区段的”{“不同行,且”}”自成一行。
  • -bli<缩排格数>或–brace-indent<缩排格数>  设置{ }缩排的格数。
  • -br或–braces-on-if-line  if(或是else,for等等)与后面执行跛段的”{“不同行,且”}”自成一行。
  • -bs或–blank-before-sizeof  在sizeof之后空一格。
  • -c<栏数>或–comment-indentation<栏数>  将注释置于程序码右侧指定的栏位。
  • -cd<栏数>或–declaration-comment-column<栏数>  将注释置于声明右侧指定的栏位。
  • -cdb或–comment-delimiters-on-blank-lines  注释符号自成一行。
  • -ce或–cuddle-else  将else置于”}”(if执行区段的结尾)之后。
  • -ci<缩排格数>或–continuation-indentation<缩排格数>  叙述过长而换行时,指定换行后缩排的格数。
  • -cli<缩排格数>或–case-indentation-<缩排格数>  使用case时,switch缩排的格数。
  • -cp<栏数>或-else-endif-column<栏数>  将注释置于else与elseif叙述右侧定的栏位。
  • -cs或–space-after-cast  在cast之后空一格。
  • -d<缩排格数>或-line-comments-indentation<缩排格数>  针对不是放在程序码右侧的注释,设置其缩排格数。
  • -di<栏数>或–declaration-indentation<栏数>  将声明区段的变量置于指定的栏位。
  • -fc1或–format-first-column-comments  针对放在每行最前端的注释,设置其格式。
  • -fca或–format-all-comments  设置所有注释的格式。
  • -gnu或–gnu-style  指定使用GNU的格式,此为预设值。
  • -i<格数>或–indent-level<格数>  设置缩排的格数。
  • -ip<格数>或–parameter-indentation<格数>  设置参数的缩排格数。
  • -kr或–k-and-r-style  指定使用Kernighan&Ritchie的格式。
  • -lp或–continue-at-parentheses  叙述过长而换行,且叙述中包含了括弧时,将括弧中的每行起始栏位内容垂直对其排列。
  • -nbad或–no-blank-lines-after-declarations  在声明区段后不要加上空白行。
  • -nbap或–no-blank-lines-after-procedures  在程序后不要加上空白行。
  • -nbbb或–no-blank-lines-after-block-comments  在注释区段后不要加上空白行。
  • -nbc或–no-blank-lines-after-commas  在声明区段中,即使出现逗号,仍旧不要换行。
  • -ncdb或–no-comment-delimiters-on-blank-lines  注释符号不要自成一行。
  • -nce或–dont-cuddle-else  不要将else置于”}”之后。
  • -ncs或–no-space-after-casts  不要在cast之后空一格。
  • -nfc1或–dont-format-first-column-comments  不要格式化放在每行最前端的注释。
  • -nfca或–dont-format-comments  不要格式化任何的注释。
  • -nip或–no-parameter-indentation  参数不要缩排。
  • -nlp或–dont-line-up-parentheses  叙述过长而换行,且叙述中包含了括弧时,不用将括弧中的每行起始栏位垂直对其排列。
  • -npcs或–no-space-after-function-call-names  在调用的函数名称之后,不要加上空格。
  • -npro或–ignore-profile  不要读取indent的配置文件.indent.pro。
  • -npsl或–dont-break-procedure-type  程序类型与程序名称放在同一行。
  • -nsc或–dont-star-comments  注解左侧不要加上星号(*)。
  • -nsob或–leave-optional-semicolon  不用处理多余的空白行。
  • -nss或–dont-space-special-semicolon  若for或while区段仅有一行时,在分号前不加上空格。
  • -nv或–no-verbosity  不显示详细的信息。
  • -orig或–original  使用Berkeley的格式。
  • -pcs或–space-after-procedure-calls  在调用的函数名称与”{“之间加上空格。
  • -psl或–procnames-start-lines  程序类型置于程序名称的前一行。
  • -sc或–start-left-side-of-comments  在每行注释左侧加上星号(*)。
  • -sob或–swallow-optional-blank-lines  删除多余的空白行。
  • -ss或–space-special-semicolon  若for或swile区段今有一行时,在分号前加上空格。
  • -st或–standard-output  将结果显示在标准输出设备。
  • -T  数据类型名称缩排。
  • -ts<格数>或–tab-size<格数>  设置tab的长度。
  • -v或–verbose  执行时显示详细的信息。
  • -version  显示版本信息。

Indent代码格式化说明

使用的indent参数 含义
–blank-lines-after-declarations bad 变量声明后加空行
–blank-lines-after-procedures bap 函数结束后加空行
–blank-lines-before-block-comments bbb 块注释前加空行
–break-before-boolean-operator bbo 较长的行,在逻辑运算符前分行
–blank-lines-after-commas nbc 变量声明中,逗号分隔的变量不分行
–braces-after-if-line bl “if”和”{“分做两行
–brace-indent 0 bli0 “{“不继续缩进
–braces-after-struct-decl-line bls 定义结构,”struct”和”{“分行
–comment-indentationn c33 语句后注释开始于行33
–declaration-comment-columnn cd33 变量声明后注释开始于行33
–comment-delimiters-on-blank-lines ncdb 不将单行注释变为块注释
–cuddle-do-while ncdw “do — while”的”while”和其前面的”}”另起一行
–cuddle-else nce “else”和其前面的”}”另起一行
–case-indentation 0 cli0 switch中的case语句所进0个空格
–else-endif-columnn cp33 #else, #endif后面的注释开始于行33
–space-after-cast cs 在类型转换后面加空格
–line-comments-indentation n d0 单行注释(不从1列开始的),不向左缩进
–break-function-decl-args nbfda 关闭:函数的参数一个一行
–declaration-indentationn di2 变量声明,变量开始于2行,即不必对齐
–format-first-column-comments nfc1 不格式化起于第一行的注释
–format-all-comments nfca 不开启全部格式化注释的开关
–honour-newlines hnl Prefer to break long lines at the position of newlines in the input.
–indent-leveln i4 设置缩进多少字符,如果为tab的整数倍,用tab来缩进,否则用空格填充。
–parameter-indentationn ip5 旧风格的函数定义中参数说明缩进5个空格
–line-length 75 l75 非注释行最长75
–continue-at-parentheses lp 续行从上一行出现的括号开始
–space-after-procedure-calls pcs 函数和”(“之间插入一个空格
–space-after-parentheses nprs 在”(”后”)”前不插入空格
–procnames-start-lines psl 将函数名和返回类型放在两行定义
–space-after-for saf for后面有空格
–space-after-if sai if后面有空格
–space-after-while saw while后面有空格
–start-left-side-of-comments nsc 不在生成的块注释中加*
–swallow-optional-blank-lines nsob 不去掉可添加的空行
–space-special-semicolon nss 一行的for或while语句,在”;”前不加空。
–tab-size ts4 一个tab为4个空格(要能整除”-in”)
–use-tabs ut 使用tab来缩进

Linux 命令大全

Python教程

Java教程

Web教程

数据库教程

图形图像教程

大数据教程

开发工具教程

计算机教程